20
INSTALLATION
POSITIONING/ATTACHMENT
LEVELLING
The drying cabinet must be level on
a flat surface, resting on all four feet.
Adjust the adjustable feet from the
outside.
ATTACHMENT TO WALL
The cabinet must be attached to a wall
to prevent tipping over.
The assembly kit includes two angle
brackets that are fitted on the top of
the drying cabinet, as illustrated. Use
the screws supplied. The brackets have
slots for fitting to the wall.
Fix the cabinet to the wall. Screws for
fixing, washers and plastic plugs are
supplied in the assembly kit.
____________________________________
The drying cabinet must not be placed in
an environment in which high-pressure
water is used for cleaning.
¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯
____________________________________
The drying cabinet is intended only for
location indoors in a dry place.
¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯
_____________________________
CAUTION
The drying cabinet must not be used
without being attached to a wall owing to
the risk of tipping over forward.
____________________________________
Fixing bracket
Top of drying
cabinet
To Next Page
Loading...
