26
STARTING DRYING PROGRAMME
LAST USED DRYING PROGRAMME
Press the on/off switch to the “ON” position - Indicated by the display lighting up
and showing the last run programme.
If you want this, press START/STOP.
Or select another drying programme by stepping through with the buttons ARROW
UP or ARROW DOWN.
Then start the drying programme with the START/STOP button.
DOOR OPEN
If the door is open when a drying programme is started and the START/STOP
button is activated, the display will show “close door”.
Close the door, and the selected drying programme will start.
IN OPERATION
The animated symbol (bar) on the left side of the display indicates that the drying
process is in progress.
CONDENSATION WATER TANK
If the condensation water tank becomes full, the drying process will be
interrupted immediately and the display will show ”check water tank”. Empty the
water tank and re-start the drying process.
COOLING
During the cool-down period the display shows the text ”cool” and a count-
down of the remaining time (5 minutes).
OPERATION
To Next Page
Loading...
