How to fix Er03 error on Asko SIVK6B9TS Hob?
If your Asko hob displays a continuous beep and Er03 flashes on the display, the control panel is likely dirty or has water on it. Clean the control panel to resolve this issue.
What does error code U400 mean on my Asko SIVK6B9TS Hob?
If you see error code U400 and/or a continuous beep on your Asko hob, it means the appliance has been connected incorrectly, or the mains voltage is too high. To resolve this, have your connection changed.
What does error code E3 mean on my Asko Hob?
If error code E3 is flashing on the display of your Asko hob, it indicates that you are using unsuitable cookware that lacks ferromagnetic properties. Use a suitable pot or pan.
What does error code E2 mean on my Asko Hob?
If you see error code E2 on your Asko hob, it means the appliance overheated and switched off. Let the appliance cool down, then start it again on a lower setting.
What to do if my Asko SIVK6B9TS displays 'u'?
If the display of your Asko hob shows ‘u’ when you switch on a cooking zone, it means that the pan you are using is not suitable for induction cooking or has a diameter of less than 12 cm. Use a suitable pan.
Why does the fuse blow when I switch on my Asko Hob?
If a fuse blows as soon as the Asko hob is switched on, it might be wrongly connected. To solve this, check the electrical connections.
Why does the display keep flashing when I switch on a cooking zone on my Asko Hob?
If the display keeps flashing when you switch on a cooking zone on your Asko Hob, the pan you are using is not suitable for induction cooking, or has a diameter of less than 12 cm. Use a suitable pan.
To Next Page
General
