Copyright © 2020-2021, ASSA ABLOY Inc. All rights reserved. Reproduction in whole
or in part without the express written permission of ASSA ABLOY Inc. is prohibited.
14
• Periodically check the fasteners. The fasteners must not be loose. If the fasteners are loose, reapply threadlocker and tighten
as necessary.
Finish Code Finish Cleaning Instructions
US32 Polished Stainless Steel Use a soft cloth and a good metal cleaner. We recommend Mr. Metal by
S.C. Johnson Company.
US32D Satin Stainless Steel Use a soft cloth and a good metal cleaner. We recommend Mr. Metal by
S.C. Johnson Company.
US32DMS Satin MicroShield Coated Use a soft cloth and mild soap and water. Never use brass polish or an abrasive
cleaner unless you intend to remove all clear coat and totally refinish the product.
US32MS Polished MicroShield
Coated
Use a soft cloth and mild soap and water. Never use brass polish or an abrasive
cleaner unless you intend to remove all clear coat and totally refinish the product.
10BE Oxidized & Oiled Bronze
Powder Coat Equivalent
Use a soft cloth and mild soap and water. Never use brass polish or an abrasive
cleaner unless you intend to remove all clear coat and totally refinish the product.
BSP Black Suede Powder Coat Use a soft cloth and mild soap and water. Never use brass polish or an abrasive
cleaner unless you intend to remove all clear coat and totally refinish the product.
WSP White Suede Powder Coat Use a soft cloth and mild soap and water. Never use brass polish or an abrasive
cleaner unless you intend to remove all clear coat and totally refinish the product.
RPC Red Powder Coat Use a soft cloth and mild soap and water. Never use brass polish or an abrasive
cleaner unless you intend to remove all clear coat and totally refinish the product.
WPC White Powder Coat Use a soft cloth and mild soap and water. Never use brass polish or an abrasive
cleaner unless you intend to remove all clear coat and totally refinish the product.
BPC Black Powder Coat Use a soft cloth and mild soap and water. Never use brass polish or an abrasive
cleaner unless you intend to remove all clear coat and totally refinish the product.
FBPC Flat Black Powder Coat Use a soft cloth and mild soap and water. Never use brass polish or an abrasive
cleaner unless you intend to remove all clear coat and totally refinish the product.
CUSTOM PC Custom Powder Coat Use a soft cloth and mild soap and water. Never use brass polish or an abrasive
cleaner unless you intend to remove all clear coat and totally refinish the product.
314E Powder Coat Equivalent
of 314 Extra Dark Bronze
Anodized
Use a soft cloth and mild soap and water. Never use brass polish or an abrasive
cleaner unless you intend to remove all clear coat and totally refinish the product.
• CAUTION: Before you clean the entire Panic Device Assembly, clean a small test area to make sure that you are satisfied with
the results.
• Frequent cleaning extends the life of all finishes.
4.1 General Maintenance Instructions
4.2 Finish Cleaning Instructions
4. Cleaning and Maintenance
To Next Page
Loading...
Need help?
General
