Assa Abloy SW60 - Cleaning

FUNCTION AND VISUAL INSPECTION
5
6
9
7
8
4
10
1
3
2
CLEANING
The best way to remove dust and dirt from the A SSA ABLOY SW60 is to use water and a soft cloth or a sponge.
A gentle detergent may be used. To maintain the quality of the surface treatment, the surfaces should be cleaned
once/four months period. The cleaning should be documented. To avoid damages to the profiles the brushes/weather
stripping must be vacuum-cleaned monthly.
• Do not expose windows, doors or profiles to alkalis. Both aluminium and glass are sensitive to alkalis.
• Do not clean with high pressure water. Operator, mode selector and sensor may be damaged and water may enter
the profiles.
• Do not use polishing detergent.
• Do not scrub with materials like Scotch-brite
TM
, as this will cause mechanical damage.
15Issue 2021-02-031019650-en-US-5.0