Assa Abloy SW60 - Regular safety checks

Regular safety checks
To help you fulfill the national/international requirements and to avoid malfunction and risk for in-
juries, we have provided the following checklist.
Do not use the operator if repair or adjustment is necessary.
If problem oc-
curs
Daily Action
Activate your operator and check visually, fastening and any damage of
•
operator
1
•
arm system
2
•
control switch
3
•
hinges
4
•
door and glass
5
Also inspect your operator and check visually for
•
sharp edges on the door leaf and door frame (if any)
6
•
condition of door seals
7
•
finger protection
8
• and finally that the complete door runs properly and closes slowly in a smooth way
Set the mode in "Off/Closed" and check that the operator and lock work together. Also check that the lock
really secures the door
9
.
Activate the manual activation unit
10
if any, and walk towards the door. Check that the door has opened
sufficiently while you pass the entrance/exit.
Set the mode in "Auto". Push the door manually in escape direction and
make sure that no object or function will prevent the door from opening.
Also make sure the escape route is free for use.
By law, these
tests must be
performed
regularly by
trained per-
sonnel.
Escape
doors
Let the door close after animpulseensuring nothing prevents the door from
closing and locking (if regulations require it).
Fire
doors
Take appropriate measures.=
Contact your ASSA ABLOY Entrance Systems representative. For contact information, see last page.=
1019650-en-US-5.0Issue 2021-02-0314