Asus RS700-E9-RS4 - Installing an ASUS PIKE II Card

2-19
ASUS RS700-E9 Series
5. InstalltheASUSPIKEIIcardandthemetalcoverassemblytotherisercardbracketor
butteryrisercardbracket.Ensurethatthemetalcoverisinsertedandrmlyseatedin
place.
Refer to section
2.5.1 Installing an expansion card to the riser card bracket
or
2.5.2
Installing an expansion card to the butterfly riser card bracket
for the steps on
installinganexpansioncardtotherisercardbracketorbutteryrisercardbracket.
2.5.3 Installing an ASUS PIKE II card
1. PreparetheASUSPIKEIIcard.
2. Remove the two screws on the ASUS
PIKEIIcard(A),thenremovethecard
bracket (B).
Ifyourexpansioncardispre-installed
withaproprietarycardbracket,
proceed to step 4.
Metal cover
Card bracket
3. SecuretheASUSPIKEIIcardandthe
metal cover (proprietary card bracket)
with the two screws.
4. Connectthemini-SASHDcabletothe
ASUSPIKEIIcard.