Asus TS110-E8-PI4 - Page 48

Chapter 3: Motherboard information
3-6
5. ME firmware force recovery setting (3-pin ME_RCVR1)
ThisjumperallowsyoutoforceIntelManagementEngine(ME)bootfromrecovery
modewhenMEbecomecorrupted.
4. Intel
®
C222 SATA port S/W RAID setting (3-pin RAID_SEL1)
ThisjumperallowsyoutoselecttheSerialATARAIDcongurationutilitytousewhenyou
creatediskarrays.Placethejumpercapsonpins1–2ifyouwanttousetheLSILogic
EmbeddedSATARAIDSetupUtility(default);otherwise,placethejumpercapsonpins
2–3tousetheIntel
®
Rapid Storage Techonology (IRST).