7
Getting started
Indicator lights & tones
Alert tones
Confirmation tone Programming command completed successfully.
Confirmation tone
every 30 seconds
The hold reminder feature is on and there is a line
on hold.
A triple-beep
During volume adjustment, the volume level has
reached the maximum or minimum.
NEW MSG
Flashes when there are new system extension
messages. The screen will display ”DTAD: XX/YY”,
with “XX” representing a number greater than
zero.
INTERCOM
On when the telephone is on an intercom call or
a paged call.
On when the system is busy and the intercom is
unavailable.
Flashes when there is an incoming intercom call.
HEADSET
On when the headset is in use.
Flashes when there is an auto-redial call with the
headset.
MUTE
On when the microphone is muted.
SPEAKER
On when the speakerphone is in use.
Flashes when there is an auto-redial call on the
speakerphone.
•
•
•
•
•
•
•
•
•
Continued from previous page
To Next Page
Loading...
