EasyManua.ls Logo

AT&T 1040 - One-Touch Dialing Setup; Understanding One-Touch Buttons

AT&T 1040
74 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
34
One-touch setup and operation
One-touch overview
This telephone has 32 one-touch locations (speed
dial locations) where you can store the phone
numbers you wish to dial using fewer keys than
usual. You can store up to 24 digits in each
location. The steps used to dial numbers stored
in one-touch locations vary according to how
you programmed the one-touch preference. See
PREFERENCE on page 35 and To dial a one-
touch number on page 38 for more details.
You can access the first 16 locations using only
the one-touch buttons. To access the remaining
16 locations, press [LOWER] and then the one-
touch button for the desired location.
You might wish to write the names or telephone
numbers of the one-touch entries on the directory
card, using the light gray spaces for the first 16
locations and the dark gray spaces for the second
16 locations (page 16 of the installation guide).
one-touch buttons
16 one-touch locations
(all light gray spaces)
16 lower one-touch
locations
(all dark gray spaces)
NOTE: Also use
the one-touch buttons
to place intercom
calls. See Intercom
operation beginning
on page 25 for
details.

Table of Contents

Other manuals for AT&T 1040

Related product manuals