AT&T 1040 User Manual

8
Getting started
Directory card
To write names and phone numbers on the directory card, follow the steps
below:
Remove the clear plastic cover by inserting a small item such as a paper
clip into the hole at the lower right corner.
Pull out the directory card.
Write the information on the directory card.
Replace the directory card and then the plastic cover.
NOTE: There is a replacement directory card in the telephone package.
You can use it to replace the current one on the telephone if necessary.
1.
2.
3.
4.
MSG
MSG
MSG

AT&T 1040 Specifications

General

Type	Corded
Lines	1
Speakerphone	Yes
Caller ID	Yes
Call Waiting	Yes
Intercom	No
Expandable	No
Handset Locator	No
Redial	Yes
Volume Control	Yes
Power Source	AC Adapter