25
Intercom operation
Intercom overview
This 1040 telephone is fully compatible with any AT&T Four-Line Small
Business System Speakerphone 1070 or 1080 phones you might have installed.
You can use a total of 16 1080/1070/1040 phones together as extensions in
your phone system.
Each individual phone in your telephone system MUST be assigned a unique
extension number for the intercom feature to work. See EXTENSION NUMBER
on page 32 of the installation guide for instructions.
This intercom features both a single-phone page and a system-wide page
(PAGE ALL).
A single-phone page alerts only one phone. A system-wide page (PAGE ALL)
alerts all system phones. Any phone with the Do Not Disturb (DND) feature
turned on does not receive the page.
An intercom call rings at the called extension with a repeating double-ring
pattern.
A single-phone page automatically turns on the speakerphone on the receiving
phone. You can deactivate the speakerphone by lifting the handset.
NOTES:
• If a line is in use, pressing [INTERCOM] places the line on hold and turns on
the intercom (page 24).
• If you subscribe to DSL service, please read Important information for DSL
users beginning on page 6 of the installation guide for information about
minimizing problems with this phone caused by DSL signals..
Lets any two extensions connected to line 1 ring
each other (page 26).
Operation:
Basic intercom operations
Function:
INTERCOM
Lets you announce over the speaker of the called
phone (page 29).
PAGE
Lets you announce to all phones in the system at
the same time (system-wide page) (page 31).
PAGE ALL
Lets you connect an intercom call with an
outside line (page 22).
CONFERENCE
To Next Page
Loading...
Need help?
General
