11
Telephone operation
Basic phone operation
Continued from previous page
Headset (purchased separately)
You can use this phone hands-free when you
install any industry-standard two-band 2.5mm
headset or other compatible, electronically
isolated headset (see page 17 of the installation
guide). Purchase the headset separately.
To make a call:
Press [HEADSET] (if a headset is connected to
the telephone base).
Wait for a dial tone, then dial the number.
To answer a call, press [HEADSET].
To hang up, press [HEADSET].
Make sure the headset is plugged into the
HEADSET jack. You hear a triple-beep if you press
[HEADSET] when the headset is not plugged in.
NOTE: If SPEAKERPHONE is selected in
the AUTOMATIC MODE menu (page 39 of the
installation guide), pressing any LINE key selects
the line and turns on the speakerphone. If
HEADSET is selected in the AUTOMATIC MODE
menu and a headset is connected, pressing any
LINE key selects the line and activate the headset.
•
1.
2.
•
•
To Next Page
Loading...
