37
One-touch setup and operation
One-touch storage
Continued from previous page
6. Press the desired one-touch key to store the
telephone number in the normal location.
-OR-
Press [LOWER], then the desired one-touch
key to store the telephone number in the lower
location.
NOTES:
If the desired one-touch key location is empty,
the screen displays SAVED! If there is a already
telephone number in it, the screen displays
REPLACE SPD#XX? (XX is the desired one-
touch location number.) You can replace the
current entry by pressing [ENTER] or keep the
current entry by pressing [ ] or [ ] until you
see NO REPLACE? Press [ENTER]. Then choose
another one-touch key location.
Only the last number dialed from this extension
can be copied to a one-touch location. The
other numbers in the redial stack cannot be
copied.
Press and hold [ENTER] to exit one-touch
setup.
•
•
•
To Next Page
Loading...
