9) Two-level feature
Each of these 6 buttons accesses 2 features, one printed on
buttons
the top half of the label and one printed on the bottom half
of the label. You can access the top feature by pressing
-Select
and then the feature button.
10) Volume control
For adjusting the volume of the built-in speakerphone when
button
you are using the speakerphone and a call is in progress, or
for adjusting the volume of the tone ringer when you are not
using the speakerphone.
11) Select button
Can be used in 4 different ways:
1)
Used with a 2-level feature button to access the top-
labeled feature
2)
Used with
Drop-Test
to initiate a self-test of your voice
terminal
3)
Used with
Conference-Ring
to select your own personalized ring
from among 8 available patterns
4)
Used with
Speaker-Reset Spkr
to perform an acoustic test of
the environment and adjust the speakerphone to the
surrounding acoustic environment for optimal
performance (for built-in speakerphone option only).
12) Transfer button
13) Dial pad
14) Microphone
15) Handset jack
16) Hold button
17) Drop/Test button
18) Conference/Ring
button
19) Message light
For transferring a call to another voice terminal.
The standard 12-button pad for dialing phone numbers and
accessing features. The letters “Q” and “Z” have been added
to the appropriate dial pad keys for directory access, and the
“5” button on your dial pad has raised bars for visually-
impaired users.
For Speakerphone operation. Used when the Speakerphone
option is set and Speaker button is depressed.
For connecting the handset cord to the voice terminal.
Located on the back of your voice terminal, labeled
For putting a call on hold.
For disconnecting from a call or dropping the last party
added to a conference call. When used with
-Select
you
can perform a self-test of your voice terminal button lights,
tone ringer, and display, if you have one.
For setting up conference calls. When used with
-Select
,
you can select a personalized ringing pattern for your voice
terminal.
For indicating when a message has been left for you (steady
red light).
3
To Next Page
Loading...
