19
TELEPHONE MEMORY
TELEPHONE MEMORY
Store a Memory Number
1 Press K, press h or lift the handset.
2 Press and release G. You will hear a beep.
3 Enter the telephone number you want to store
(up to 24 digits) or press a to store
the last number dialed. You will hear a beep each
time you press a button. Press P to store a
three-second dialing delay.
4 Press and release a memory button
— OR —
Press and release l, then a memory button.
You will hear a two-beep confirmation tone.
5 Hang up.
Repeat Steps 1-5 to store another number.
If you hear a series of five beeps, an error was made.
Repeat Steps 1-5 in order to repeat the number you
wish to store.
NOTE: You cannot store a pause as the first digit
of a memory number.
Dial a Memory Number
1 Press L or l.
2 Lift the handset
— OR —
Press K
— OR —
Press h and listen for dial tone.
3 Press and release a memory button
— OR —
Press and release l then a memory button.
Erase a Memory Number
To remove a number from memory, enter another number
in the same location. To clear a memory location and
leave it empty,
1 Press L or l, then lift the handset.
2 Press G.
3 Press the button of the memory location you
want to clear.
M
MM
MM
M
MM
MM
M
MM
MM
❖
❖❖
❖❖ ❙
❙❙
❙❙
M
MM
MM
❘
❘❘
❘❘
M
MM
MM
P
PP
PP
M
MM
MM
P
PP
PP
M
MM
MM
❙
❙❙
❙❙
M
MM
MM
M
MM
MM
To Next Page
Loading...
Need help?
General
