EasyManuals Logo

AT&T Calypso User Manual

AT&T Calypso
217 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #17 background imageLoading...
Page #17 background image
17
Install a SIM/SD Card
Insert a Nano SIM/microSD card
1. From the back of the phone, insert a ngernail into the small slot at the
bottom left corner and gently pull up to remove the back cover.
Note: The back cover cannot be removed while the charger is plugged in.
2. On the back of the phone, slide the Nano SIM card into the SIM card slot at
the top left with the gold contacts facing down.
3. Slide the microSD card into the SD card slot at the top right.
4. Replace the back cover and press rmly around side and all four corners
until it snaps into place.
nanoSIM microSD
Back removal notch
Mount an SD card
1. With an SD card inserted, swipe up from the Home screen to access Apps
and tap Settings .
2. Tap Storage > SD CARD.
3. Tap MOUNT on the prompted screen.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the AT&T Calypso and is the answer not in the manual?

AT&T Calypso Specifications

General IconGeneral
BrandAT&T
ModelCalypso
NetworkGSM / HSPA / LTE
Display TypeIPS LCD
RAM2GB
Storage16 GB
Front Camera5 MP
ColorsBlack
Display Size5.5 inches
OSAndroid 10
Main Camera5 MP
Battery2500 mAh

Related product manuals