214
exposure guidelines for use with an accessory that contains no metal and
the positions the handset a minimum of 1.5 cm from the body. Use of other
accessories may not ensure compliance with FCC RF exposure guidelines.
If you do not use a body-worn accessory and are not holding the phone at
the ear, position the handset a minimum of 1.5 cm from your body when the
phone is switched on.
Hearing Aid Compatibility
(HAC) for Wireless Telecommunication Devices
This phone has a HAC rating of M3/T4.
What is hearing aid compatibility?
The Federal Communications Commission has implemented rules and a
rating system designed to enable people who wear hearing aids to more
effectively use these wireless telecommunications devices. The standard
for compatibility of digital wireless phones with hearing aids is set forth in
American National Standard Institute (ANSI) standard C63.19. There are
two sets of ANSI standards with ratings from one to four (four being the best
rating): an “M” rating for reduced interference making it easier to hear
conversations on the phone when using the hearing aid microphone, and a
“T” rating that enables the phone to be used with hearing aids operating in
the telecoil mode thus reducing unwanted background noise.
How will i know which wireless phones are hearing aid compatible?
The Hearing Aid Compatibility rating is displayed on the wireless phone
box. A phone is considered Hearing Aid Compatible for acoustic coupling
(microphone mode) if it has an “M3” or “M4” rating. A digital wireless phone is
considered Hearing Aid Compatible for inductive coupling (telecoil mode) if
it has a “T3” or “T4” rating.
To Next Page
Loading...
Need help?
General
