Getting started
10
Installation options
The telephone base comes with a mount bracket set for tabletop use. If you
want to mount your telephone on a wall, rotate the mount bracket down
so the telephone can connect with a standard dual-stud telephone wall-
mounting plate. If you do not have this mounting plate, you can purchase
one from many hardware or consumer electronics retailers. You might need a
professional to install the mounting plate.
Tabletop to wall-mount installation
To install the telephone base in the wall-mount position, make sure that you
first unplug the telephone line cord and power adapter from the telephone
wall jack and power outlet. Make sure they are plugged into their jacks on
the telephone base and routed through the channels.
1. Press the tabs indicated by the arrows. The bracket will detach from the
telephone base. Rotate it down into wall-mount position, making sure it
clicks into place.
Table-mount Wall-mount
Side view
Rear view
To Next Page
Loading...
