AT&T CL84115 User Manual

Multiple handset use
46
Intercom
If you have other registered device(s) or more than one handset, the
telephone base shows INTERCOM TO:. Use the dialing keys to enter aenter a
specific handset number (1-9 for handsets 1-9, TONE followed by 0-2
for handsets 10-12, # for a single headset/speakerphone, # followed
by 1 or 2 for headset/speakerphone 1 or 2, or TONE followed by # for
all devices), or presspress qCID or pDIR to scroll to the desired handset and
press MENU/SELECT. The telephone base shows Calling HANDSET X or
Calling all handsets.
The destination handset(s) rings and shows Base is
calling, BASE 0 is calling or BASE 0 is calling all.
2. To answer the intercom call, press PHONE/FLASH,
/SPEAKERSPEAKER or any dialing key (0-9, TONE , or
#
)
on the destination handset. Both the base and the
handset now show Intercom.
3. To end the intercom call, one party presses
OFF/CANCEL or places the cordless handset back in
the charger, presses CANCEL on the telephone base,
or hangs up the corded handset. The other party hears four beeps. Both. The other party hears four beeps. Both The other party hears four beeps. Both
devices display Intercom ended.
NOTES:
Before the intercom call is answered, you can cancel it by pressing OFF/CANCEL on the
handset or CANCEL on the telephone base.
If the called device is not answered within 100 seconds, or if it is in use, on a call or out of
range, the initiating device shows No answer. Try again..
To temporarily silence the intercom ringer, press OFF/CANCEL or MUTE/DELETE on the
handset, or press CANCEL or MUTE on the telephone base.
You can only use one pair of devices at a time to make intercom calls.
For cordless headsets and speakerphones, refer to the corresponding user’s manual on how
to answer and end an intercom call.
If a total of two cordless headset(s) and/or speakerphone(s) are registered to the telephone
base, they appear as HEADSET 1 and HEADSET 2, respectively, in the intercom menu.
Answer an incoming call during an intercom call
If you receive an outside call during an intercom call, there is a two-beep call
waiting tone.
To answer the call, press PHONE/FLASH on the cordless handset. You can
also lift the corded handset or press /SPEAKER on the telephone base.
The intercom call ends automatically. The party on the intercom call hears
four beeps. Other system devices can also answer the incoming call by
pressing PHONE/FLASH or /SPEAKER on the handset, or pressing
/SPEAKER or lifting the corded handset on the telephone base.
To end the intercom call without answering the incoming call, press
OFF/CANCEL on the handset or CANCEL on the telephone base. You can
also return the corded handset back to the telephone base.
NOTE: For cordless headsets and speakerphones, refer to the corresponding user’s manual
on how to answer an incoming call during an intercom call.
•
•
•
•
•
•
•
•
•
10:01
PM
10/15
Intercom
BASE 0
is calling

AT&T CL84115 Specifications

General

Brand	AT&T
Model	CL84115
Category	Cordless Telephone
Language	English