AT&T CL84115 User Manual

Telephone operation
38
Telephone operation
To redial a number:
Using a cordless handset:
To dial the displayed number, press PHONE/FLASH or /SPEAKERSPEAKER.
-OR-
Press PHONE/FLASH or /SPEAKERSPEAKER, then press REDIAL/PAUSE
repeatedly to view the redial memory. Press MENU/SELECT to dial the
displayed number.
Using the telephone base:
To dial the displayed number, lift the corded handset or press /SPEAKERSPEAKER.
-OR-
Lift the corded handset or press /SPEAKERSPEAKER. Then, press REDIAL/PAUSE
repeatedly to view the redial memory. Press MENU/SELECT to dial the
displayed number.
To delete a redial entry:
Using a cordless handset:
While the screen displays the desired number, press MUTE/DELETE to
delete the number from the redial memory.
Using the telephone base:
While the screen displays the desired number, press X/DELETE to delete
the number from the redial memory.
Equalizer
The handset and base equalizers enable you to change the quality of the
audio to best suit your hearing.
Using a cordless handset:
While on a call or intercom call, or listening to a message or announcement,
press EQ on the cordless handset to select the equalizer setting Treble 1,
Treble 2, Bass or Natural (the default setting). The current setting is shown
on the handset screen for two seconds.
Using the telephone base:
1. While on a call, pressWhile on a call, press MENU/SELECT.
2. Press qCID or pDIR to scroll to Equalizer and then press MENU/SELECT.
3. Press qCID or pDIR to select Treble 1, Treble 2, Bass or Natural (the
default setting), then press MENU/SELECT to store the setting.
NOTES:
If you switch the call between the handset and the speakerphone by pressing /SPEAKER, the
audio setting remains unchanged.
The current equalizer setting remains unchanged until a new setting is selected.
•
•
•
•
•
•
•
•

AT&T CL84115 Specifications

General

Brand	AT&T
Model	CL84115
Category	Cordless Telephone
Language	English