AT&T CL84115 User Manual

Multiple handset use
52
Push-to-talk (PTT)
Answer a PTT call
You can respond to a PTT call, as described below.
When your device receives a PTT call, it beeps and shows Press and hold
[PTT] to talk.
When the other party is speaking, your speakerphone light is on, and your
device shows:
PTT From HS X To HS X (the first X represents the initiating handset
number, and the second X represents your handset number; a
maximum of four handset numbers appear).
-OR-
PTT From HS X To Base (X represents the initiating handset number) or
PTT From HS X To Base & HS X (the first X represents the initiating
handset number, and the second X represents your handset number;
a maximum of four handset numbers appear).
-OR-
PTT From Base To HS X (the X represents your handset number; a
maximum of five handset numbers appear).
When your speakerphone light is off (the screen shows Press and hold
[PTT] to talk), press and hold PUSH TO TALK on your handset or
PTT/FLASH on your telephone base. You will hear a chirp. Speak towards
the device.
While you are speaking, your device shows PTT To Base, PTT To
Handset: X (X represents the handset numbers of one or more
destination handsets; a maximum of five handset numbers appear), or
PTT To Base & Handset: X (X represents the handset numbers of one or
more destination handsets; a maximum of four handset numbers appear) .
Your voice is broadcast to all destination devices.
After speaking, release PUSH TO TALK on your handset or PTT/FLASH
on your telephone base. Your device will beep. After the beep, if your
speakerphone light is off, you can press and hold PUSH TO TALK on your
handset or PTT/FLASH on your telephone base to continue speaking, or
the destination device can respond.
1.
2.
•
•
•
3.
•
•
Change a one-to-one PTT call to an intercom call
You can convert a one-to-one PTT session to an intercom call.
When your device shows Press and hold [PTT] to talk, press MENU/SELECT.
The screen shows Intercom.
Press MENU/SELECT. Your device displays Calling base, Calling BASE
0 or Calling HANDSET X. The destination device briefly shows Push to
talk Ended and then HANDSET is calling, HANDSET X is calling, Base is
calling or BASE 0 is calling. The destination device rings.
1.
2.

AT&T CL84115 Specifications

General

Brand	AT&T
Model	CL84115
Category	Cordless Telephone
Language	English