AT&T CL84115 User Manual

Answering system
90
Message playback
Options during playback
When a message is playing, you can adjust the playback volume, skip, repeat,
pause, stop or delete the message.
When messages are playing on the telephone base:
Press VOL q or VOL p to adjust the message playback volume.
Press /SKIP to skip to the next message.
Press /REPEAT to repeat the message. Press twice to hear the previous
message.
Press X/DELETE to delete the message.
Press /PLAY/STOP to stop the playback.
Press /SPEAKERSPEAKER to stop playback. The screen shows Call back?, then press
MENU/SELECT, or /SPEAKERSPEAKER to call back the caller if the caller’s number
is available. If the dialing format used is not correct, then use the following
option to choose the correct dialing format before calling back the caller.
Press MENU/SELECT to pause playback and show the caller ID information,
if available. From here, you can press CANCEL to resume playback.
You can also press # (pound key) repeatedly to show the desired dialing
option (page 68), then press /SPEAKERSPEAKER or MENU/SELECT to call back
the caller. If you do not call back within 10 seconds, message playback
resumes automatically.
When messages are playing on the handset:
Press qCID/VOLUME or pDIR/VOLUME to adjust the message playback volume.
Press EQ to adjust the message playback audio quality.
Press 6 to skip to the next message.
Press 4 to repeat the message. Press twice to hear the previous message.
Press MUTE/DELETE to delete the message.
Press 5 or OFF/CANCEL to stop the playback.
Press /SPEAKERSPEAKER to switch between speakerphone mode and handset mode.
Press PHONE/FLASH to stop playback. The screen shows Call back?,
then press MENU/SELECT, PHONE/FLASH, or /SPEAKERSPEAKER to call back the
caller if the caller’s number is available. If the dialing format used is not
correct, then use the following option to choose the correct dialing format
before calling back the caller.
Press MENU/SELECT to pause playback and show the caller ID information,
if available. From here, you can press OFF/CANCEL to resume playback.
You can press # (pound key) repeatedly to show the desired dialing
option (page 68), then press PHONE/FLASH or /SPEAKERSPEAKER to call back
the caller. If you do not call back within 10 seconds, message playback
resumes automatically.
NOTE: The equalizer stays on the same settings until you change it by pressing EQ .
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•

AT&T CL84115 Specifications

General

Brand	AT&T
Model	CL84115
Category	Cordless Telephone
Language	English