Multiple handset use
Handset locator
The handset locator feature is useful if you
misplace any handsets.
To start the paging tone:
Press /HANDSET LOCATOR on the
telephone base to start the paging tone on
all handsets for 60 seconds.
NOTE: If you press
OFF/CANCEL or MUTE/DELETE
on a handset, the ringer of that handset stops, but
the paging to the rest of the handsets continues.
To stop the paging tone:
Press
PHONE/FLASH, /SPEAKERSPEAKER, or
any dialing key (0-9, TONE or #) on the
handset(s).
-OR-
Press /HANDSET LOCATOR, MUTE or
CANCEL on the telephone base.
Join a call in progress
When a handset or the telephone base is already on a call and you would
like to join the call, press
PHONE/FLASH or /SPEAKERSPEAKER on your handset or
/SPEAKERSPEAKER on your telephone base, or lift the corded handset.
To end the call using a cordless handset, press
OFF/CANCEL or place the
handset in the charger. To end the call using the telephone base, press
/SPEAKERSPEAKER or return the corded handset to the telephone base. The call
does not end until all handsets and the telephone base hang up.
NOTE: You can use up to four system handsets and the telephone base at the same time
on an outside call.
•
•
•
Multiple handset use
44
** Paging **
To Next Page
Loading...
Need help?
General
