73
Call block
Call block
Review call block list
When the telephone base is in idle mode, press MENU/SELECT.
Press qCID or pDIR to scroll to Call block, and then
press MENU/SELECT.
Press MENU/SELECT to choose Block list.
Press MENU/SELECT again to choose Review.
Press qCID or pDIR to browse through the call block entries.
NOTE: Block list is empty appears if there are no call block entries.
Save a caller ID log entry to call block list
Search for the desired caller ID log entry (see Review the caller ID log on
page 67).
When the desired entry displays, press MENU/SELECT.
Press qCID or pDIR to scroll to Call block, then press MENU/SELECT.
The screen displays EDIT NUMBER. Use the dialing keys to edit the
number, when necessary.
Press qCID or pDIR to move the cursor to the left or right.
Press X/DELETE on the telephone base to backspace and erase
a digit.
Press and hold X/DELETE on the telephone base to erase the
entire entry.
Press and hold REDIAL/PAUSE to insert a three-second dialing pause (a
p appears).
5. Press MENU/SELECT to move to the name. The screen displays EDIT NAME.
6. Use the dialing keys to add or edit the name.
Press qCID or pDIR to move the cursor to the left or right.
Press 0 to add a space.
Press X/DELETE on the telephone base to erase a character.
Press and hold X/DELETE on the telephone base to erase all characters.
Press # (pound key) to move the last word to the front. For example,
Johnson Charlie becomes Charlie Johnson when you press
# (pound key).
7. Press MENU/SELECT when done and the screen shows Saved.
1.
2.
3.
4.
5.
1.
2.
3.
4.
•
•
•
•
•
•
•
•
•
>Review
Add new entry
p
q
To Next Page
Loading...
Need help?
General
