Answering system
85
Answering system settings
Message recording time
You can set the recording time allowed for incoming messages. The message
length is three minutes by default.
To change the setting:
Using a cordless handset:
1. When the handset is in idle mode, press MENU/SELECT to
enter the main menu.
2. Press qCID or pDIR to scroll to Answering sys, then
press MENU/SELECT.
3. Press qCID or pDIR to scroll to Ans sys setup, then
press MENU/SELECT.
4. Press qCID or pDIR to scroll to Recording time, then
press MENU/SELECT.
Press qCID or pDIR to choose 3 minutes, 2 minutes or
1 minute, then press MENU/SELECT to save the setting. You
hear a confirmation tone.
Using the telephone base:
1. When the telephone base is in idle mode, press
MENU/SELECT to enter the main menu.
2. Press qCID or pDIR to scroll to Answering sys, then
press MENU/SELECT.
3. Press qCID or pDIR to scroll to Ans sys setup, then
press MENU/SELECT.
4. Press qCID or pDIR to scroll to Recording time, then
press MENU/SELECT.
Press qCID or pDIR to choose 3 minutes, 2 minutes or 1 minute, then
press MENU/SELECT to save the setting. You hear a confirmation tone.
5.
5.
>Recording time
Msg alert tone
p
q
RECORDING TIME
>3 minutes
p
q
>Recording time
Msg alert tone
RECORDING TIME
>3 minutes
To Next Page
Loading...
Need help?
General
