AT&T DataRemote POTS in a BOX CDS9070 - Page 76

76
Access Point
BSSID
A group of wireless workstations and a
wireless local area network access point
form a basic service set (BSS), each
computer in the BSS must be
configured with the same BSSID
Frequency
Choose a channel frequency
HT Physical
Mode
The HT (High Throughput) Physical
mode settings allow for control of the
802.11n wireless environment.
Operating
Mode
Mixed Mode: In this mode, packets are
transmitted with a preamble compatible
with the legacy 802.11a/g, the rest of
the packet has a new format
Green Field: In this mode, high
throughput packets are transmitted
without a legacy compatible part