94
Smart call blocker
Call block settings
Voice guide to set Smart call blocker
This feature is an easy and alternative way for you to do the basic setup of
Smart call blocker. You can follow the voice guide to set your telephone system
to allow or to screen all incoming home calls, or to screen home calls that do
not display a phone number.
1. Press VOICE/CALL BLOCK on the handset when it is not in use.
-OR-
Press MENU/SELECT to enter the main menu when the
handset is not in use. Press qCID or pDIR to scroll to
Smart call blk, then press MENU/SELECT.
2. Press qCID or pDIR to scroll to Voice guide, then press
MENU/SELECT.
3. You hear a voice prompt “Hello! This voice guide will assist
you with the basic setup of Smart call blocker...”
4. Set up your Smart call blocker feature by inputting the
designated numbers, as instructed in the voice guide.
f Press 1 if you want to screen home calls with telephone
numbers that are not saved in your directory, allow list or star name list; or
f Press 2 if you do not want to screen calls, and want to allow all incoming
calls to get through.
Notes:
f The screening feature of Smart call blocker is applicable to home calls only. All incoming cell calls will get through and ring. If
you want to block a cell call, add the number to the block list. See Block list on page 80.
f You can press OFF/CANCEL to quit the voice guide at any time.
f After a power outage, the handset prompts you to set the date and time. After the date and time setting is done or
skipped, the handset will prompt if you want to set up Smart call blocker via voice guide. Press MENU/SELECT to
start the setup.
Smart call blk
ECO
Voice guide
ECO
To Next Page
Loading...
