AT&T DL72119 - Call Screening

112
Answering system
About the answering system
Call screening
To screen calls at the telephone base:
If the answering system and call screening
are on, the announcement and the incoming
message broadcast at the telephone base
when a call is answered by the answering
system.
Options while a message is being recorded:
f Press VOL or VOL on the telephone
base to adjust the call
screening volume.
f Press VOL or VOL totemporarilyturnonorothecallscreening.
f Press /PLAY/STOP to temporarily turn on the call screening if the call
screeningissettoo.
To screen calls at the cordless handset:
If the answering system is on and a call is being answered by the answering
system, the handset shows To screen call press [SELECT] at the same time.
Press MENU/SELECT to screen the call on your handset. The handset shows
the caller’s information. If you do not subscribe to caller ID service, the handset
shows Screening....
Options while a message is being recorded:
f Press CID/VOLUME or DIR/VOLUME on the handset to adjust the call
screening volume.
f Press /SPEAKER to switch between speakerphone mode and handset
mode.
f Press HOME/FLASH to answer the call.