AT&T DL72119 - Ringer Volume

30
Telephone settings
Handset settings
Ringer volume
You can select the ringer volume for incoming home and cell
calls.Aringeroicon showswhenthevolumeissettoo.
To set the ringer volume on home line:
1. Press MENU/SELECT in idle mode.
2. Press CID or DIR to highlight Ringers, then press
MENU/SELECT.
3. Press MENU/SELECT to select Home volume.
4. Press CID or DIR to sample each ringer volume for
home line.
5. Press MENU/SELECT to save.
To set the ringer volume on cell lines:
1. Press MENU/SELECT in idle mode.
2. Press CID or DIR to highlight Ringers, then press
MENU/SELECT.
3. Press CID or DIR to select Cell volume, then press
MENU/SELECT,
4. Press CID or DIR to sample each ringer volume for cell
lines.
5. Press MENU/SELECT to save.
Telephone base ringer volume
When the telephone base is idle, press VOL or VOL on the
telephone base to adjust the ringer volume.
Whenyousettheringervolumetozero,thebaseringeriso
and the system announces, “Base ringer is o.”
Notes:
f Changing the handset ringer volume does not aect base ringer volume.
f If the ringer volume is set to o, that handset or the telephone base is silenced for all incoming calls.
f The ringer volume level also determines the ringer levels of intercom calls.
Home volume
ECO
Volume:
ECO
Ringers
ECO
Cell volume
ECO
Volume:
ECO