AT&T DL72119 - Getting Started; Installation

Installation
Install the telephone base close to a telephone jack and a power outlet not
controlledbyawallswitch.Thetelephonebasecanbeplacedonaatsurface
or vertically mounted on the wall (page 13). For optimum range and better
reception, place the telephone base in a central and open location.
You may hear interference if your cellular phone is too close to the telephone
base during a CELLULAR call. Make sure that your Bluetooth enabled cellular
phone is within 15 feet of the telephone base in order to maintain a clear and
consistent connection between your Bluetooth cell phone, telephone base and
cell tower.
If you subscribe to high-speed Internet service (DSL - digital subscriber line)
throughyourtelephoneline,youmustinstallaDSLlterbetweenthe
telephone line cord and the telephone wall jack (page 8).Thelterprevents
noise and caller ID problems caused by DSL interference. Please contact your
DSLserviceproviderformoreinformationaboutDSLlters.
Your product may be shipped with a protective sticker covering the handset or
telephone base display - remove it before use.
For customer service or product information, visit our website at
https://telephones.att.com or call 1 (800) 222-3111. In Canada, dial
1 (866) 288-4268.
Avoid placing the telephone base and charger too close to:
f Communication devices such as television sets, VCRs, or other
cordless telephones.
f Excessive heat sources.
f Noisesourcessuchasawindowwithtracoutside,motors,microwave
ovens,refrigerators,oruorescentlighting.
f Excessive dust sources such as a workshop or garage.
f Excessive moisture.
f Extremely low temperature.
f Mechanical vibration or shock, such as on top of washing machine or
workbench.
You must install and charge
the battery before using the
cordless handset.
See pages 10-12 for easy
instructions.
1
Getting started