38
Telephone settings
Handset settings
Dial mode
The dial mode is preset to tone dialing. If you have pulse (rotary) service, you
must change the dial mode to pulse dialing before using the telephone.
To set the dial mode:
1. Press MENU/SELECT in idle mode.
2. Press CID or DIR to highlight Settings, then press
MENU/SELECT.
3. Press CID or DIR to highlight Dial mode, then press
MENU/SELECT .
4. Press CID or DIR to choose Touch-tone or Pulse, then
press MENU/SELECT.
Note: If you have dial pulse (rotary) dialing service only, refer to Temporary tone
dialing on page 47 to temporarily switch from pulse to touch-tone dialing during a
call.
Dial mode
ECO
Touch-tone
ECO
To Next Page
Loading...
