106
Answering system
Answering system settings
Call screening
Use this feature to choose whether incoming messages can be heard over the
telephone base when they are being recorded. If you turn call screening on, you
hear the incoming message.
To turn on or o the call screening feature:
1. Press MENU/SELECT in idle mode.
2. Press CID or DIR to highlight Answering sys, then press
MENU/SELECT .
3. Press CID or DIR to highlight Ans sys setup, then press
MENU/SELECT twice to select Call screening.
4. Press
CID or DIR
to choose between On and O, then
press
MENU/SELECT
to save.
Note: For more information on call screening, see page 112.
Call screening
ECO
On
ECO
To Next Page
Loading...
