AT&T DL72119 - Block List

80
Smart call blocker
Call block settings
Block list
Add numbers that you want to prevent their calls from ringing through. The
block list stores up to 1,000 entries.
Note: Home or cell calls with numbers that have been added to your block list will be blocked.
Add a block entry:
1. Press VOICE/CALL BLOCK when it is not in use.
-OR-
Press MENU/SELECT to enter the main menu when it is not in use. Press CID
or DIR to scroll to Smart call blk, then press MENU/SELECT.
2. Press CID or DIR to scroll to Block list, and then press MENU/SELECT.
3. Press CID or DIR to scroll to Add new entry, then press MENU/SELECT.
4. When the screen displays Enter number, use the dialing keys to enter a
number (up to 30 digits).
f Press CID or DIRtomovethecursortotheleorright.
f Press MUTE/DELETE on the handset to erase a digit.
f Press and hold MUTE/DELETE on the handset to erase all digits.
f Press and hold REDIAL/PAUSE to enter a three-second dialing pause (a P
appears).
-OR-
Copy a number from the redial list by pressing REDIAL/PAUSE. Then, press
CID or DIR or REDIAL/PAUSErepeatedlytondthedesirednumber.Press
MENU/SELECT to copy the number.
5. Press MENU/SELECT to move on to the name.
f The screen shows Number repeated if the number is already in the block
list. You cannot save the same number twice.
6. When the screen displays Enter name, use the dialing keys to enter a name
(up to 15 characters). Press a key repeatedly until the desired character
appears.Therstcharacterofeverywordiscapitalized.
f Press CID or DIRtomovethecursortotheleorright.
f Press 0 to add a space.
f Press MUTE/DELETE on the handset to erase a character.
f Press and hold MUTE/DELETE on the handset to erase all characters.
f Press TONE to change the next letter to upper or lower case.