AT&T DL72119 - Message Playback

114
Answering system
Message playback
You can listen to messages at the telephone base or on a cordless handset.
When playback begins, the total number of messages is announced. Before
eachmessage,youhearthedayandtimeoftherecording.Aerthelast
message, you hear, “End of messages.”
If the date and time are not set, you hear, “Time and date not set.” before
playback. If the recording time is less than three minutes, you hear, “Less than
three minutes to record.” before playback (see Message capacity on page
111).
To listen to messages at the telephone base:
1. Press /PLAY/STOP on the telephone base to listen to the messages. If
you have new messages, the telephone plays only the new messages (oldest
rst).Iftherearenonewmessages,thetelephoneplaysbackallmessages
(oldestrst).
2. The system announces the number of messages, then begins playback. The
message sequence is shown on the message window.
3. Press /PLAY/STOP to stop the playback.
Note: If there are no messages in the answering system, the system announces, “You have no message.” when you
attempt to listen to messages.
To listen to messages at the handset:
1. Press MENU/SELECT when the handset is idle.
2. Press MENU/SELECT again to select Play messages. If
you have either new or old messages, the messages play
automatically.
3. The system announces the number of messages, then
begins playback. The message sequence is shown on the
handset’s screen.
4. Press OFF/CANCEL to stop the playback.
Play messages
ECO
16 New 06 Old
ECO
Repeat Del Skip
[4] [3] [6]
ECO
10:30
PM
10/16
MSG #