AT&T DL72119 - Activate Remote Voice Control

27
Bluetooth
Remote voice control
Activate remote voice control
1. Press VOICE/CALL BLOCK on the handset.
f If you have connected one cell phone to the
telephone, the handset shows the device name
of the connected cell phone directly.
f If you have connected two cell phones to
the telephone, the handset shows Select a
device, followed by the device name list of the
connected cell phones. Scroll to choose the
desired cell phone, and then press MENU/SELECT.
2. The handset then shows the remote voice control
icon .
f If the activation fails, the handset displays Not available. When the screen
returns to idle, try Step 1 again.
3. Whenthehandsetplaystheconrmationtoneasforwardedbythecell
phone’s voice app, start speaking toward the handset, and then wait for
feedback. Make reply to the voice app’s feedback, if necessary.
f You can press /SPEAKERonthehandsettoturnothespeakerphone
and listen to the feedback through the handset earpiece.
4. To end the current remote voice control session, press OFF/CANCEL on
the handset. You can restart by following Steps 1-3 mentioned above.