Paging
Paging is using your console to broadcast an announcement.
You can page in two ways:
• Speakerphone Paging is heard on all speakerphones in
the system or, if programmed that way, by selected groups
such as departments or work areas. Extension numbers
can be assigned for paging all the speakerphones in your
system (Page All) or for paging just the speakerphones in
certain groups (Group Page).
• Loudspeaker Paging is heard by everyone in the building
or a particular area (called a "zone"), depending on how
the loudspeaker system is set up.
• The Loudspeaker Paging feature must be
system programmed, and a loudspeaker paging
device must be installed.
• Speakerphone Paging extension numbers and/or
Loudspeaker Paging access codes are required and
can be assigned to DSS buttons.
• Co-workers who are using their speakerphones will not
hear a speakerphone page.
• QCC operators cannot be paged through their
speakerphones.
4-34
To Next Page
Loading...
