Signaling
Use Signaling to notify co-workers when they have visitors or
to remind them of meetings. You can signal multiline phones
only.
You and your co-workers can prearrange the signals. For
example, you can arrange two beeps for a visitor and three
beeps for a reminder.
To Use Signaling
1. Select a call button.
2. Lift the handset, press Speaker, or use the headset.
You hear a dial tone.
3. Press
Forced Release
.
The light next to the selected call button goes off.
4. Press the DSS button for your co-worker.
5. Hang up.
4-41
To Next Page
Loading...
