Press You see For Description
Drop s Stop Stops the dialing sequence so
you can enter specific digits,
such as a credit card number or
password. When programming a
sequence of numbers into the
Personal Directory, press Drop
when numbers need to be dialed
manually. To use, listen for the
Drop signal; then select the
Directory listing again to continue
the dialing process.
Conf f Flash Sends a switchhook flash
needed for some custom calling
features. The flash must be the
first entry in the sequence of
programmed numbers.
Hold p Pause Inserts a brief pause
(1.5 seconds) to allow a
computer to respond after an
initial set of numbers has
been dialed. For example, press Hold
between programming a
long-distance phone number and
a calling card number. You can
insert as many pauses as needed.
A-2
To Next Page
Loading...
