Inspect Screen
The Inspect screen has three functions:
• to display information about call buttons and fixed feature
buttons
• to allow you to view the status of system alarms and the
number of busy trunks in a pool
• to display the extension and message status of DSS
buttons
You cannot inspect information about unlabeled or imprinted
display buttons (Home, Menu, More, and Inspct)orthe
dedicated feature buttons. If you press an imprinted display
button or a dedicated feature button, your console is no
longer in Inspect mode.
To help you identify information, the lines on the Inspect
screen are numbered in the following illustrations. Refer to
these illustrations as you read the next pages.
1-25
To Next Page
Loading...
