3
4
5
6
7
Dial two digits for the month (01 through 12).
Dial two digits for the day (01 through 31).
Dial two digits for the year (00 through 99).
For example, if the date is May 16, 1986, dial *80 05 16 86.
Touch Administer.
The console beeps twice.
Leave administration mode by sliding the T/P switch to the center
position.
To set the current time:
1
2
3
4
5
6
Enter administration mode by sliding the T/P switch to P and touching
Administer.
Dial *81.
Dial two digits for the hour (00 through 23).
Dial two digits for the minute (00 through 59).
For example, if the time is 3:25 A.M., dial *81 03 25; if the time is 3:25
P.M., dial *81 1525.
Touch Administer.
The console beeps twice.
Leave administration mode by sliding the T/P switch to the center
position.
Control Unit Jack Assignment for the System Feature Report. To assign a
voice terminal jack on the control unit for the System Feature Report: (The
system is factory-set to have the the data collector and printer connected to
voice terminal jack 19 for the Call Report feature; it is best to use the same
jack assignment for the System Feature Report.)
1
2
3
4
Enter administration mode by sliding the T/P switch to P and touching
Administer.
Dial *85.
Touch the Auto Intercom button of the jack to which the data collector
and the printer are connected for the Call Report feature.
Touch Administer.
The console beeps twice.
MERLIN Plus System Features 5-69
To Next Page
Loading...
Need help?
General
