To clear all the entries from an allowed list:
1 Enter administration mode by sliding the T/P switch to P and touching
Administer.
2 Dial a * and a 2-digit code (01 through 08) that corresponds to the number
of the list you want to clear.
3
4
5
For example, to clear all entries from List 6, dial '06.
Touch Drop.
Touch Administer.
The console beeps twice.
Leave administration mode by sliding the T/P switch to the center
position.
Before you assign allowed lists to voice terminals in your system, refer to the
Call Restrictions and Allowed Lists Directory that you have filled out.
To assignor remove voice terminals for access to allowed lists:
1
2
3
4
5
6
Enter administration mode by sliding the T/P switch to P and touching
Administer.
Dial a * and a 2-digit code (01 through 08) that corresponds to the list you
want to assign to the voice terminal.
Dial 00.
The green light goes on next to the Auto Intercom button for each voice terminal to which this
list is already assigned.
For example, to assign List 2 to a voice terminal, dial *02 00.
Touch the Auto Intercom button for the voice terminal for which you are
giving access or removing access to the allowed list.
Green light on =
the list is assigned to the voice terminal
Green light off =
the list is not assigned to the voice terminal
Touch Administer.
The console beeps twice.
Leave administration mode by sliding the T/P switch to the center
position.
MERLIN Plus System Features
5-9
To Next Page
Loading...
Need help?
General
