AT&T Syn248 SB35031 - Making Calls with the Optional DECT Cordless Headset

Outgoing Calls 25
Syn248 SB35031 Deskset User’s Guide Back to Contents
Making Calls with the Optional DECT Cordless Headset
If you have an optional AT&T DECT Cordless Headset registered to your Deskset, then
you can make calls with the headset. Use the Deskset dial pad to dial the number.
To make a call with the Cordless Headset:
1. Remove the headset from its charger and press the ON/OFF button on the headset.
The headset is active when you hear a dial tone.
2. Dial the extension or phone number on the Deskset.
3. Press the headset ON/OFF button to end the call.
OR
1. Predial the extension or phone number on the Deskset.
2. Press the headset ON/OFF button to initiate dialing and transfer the audio to the
headset.
3. Press the headset ON/OFF button to end the call.