AT&T Syn248 SB35031 - Deregistering Cordless Headset

Deskset Settings 93
Syn248 SB35031 Deskset User’s Guide Back to Contents
Deregistering a Cordless Headset
You must deregister cordless accessories before you can register them to different
Desksets. If you remove a Deskset from the system, first deregister any cordless
accessories.
To deregister a cordless accessory:
1. Press (MENU), then 2, and then 5.
The Cordless Headset Registration menu appears.
2. Press . The confirmation message appears.
3. Press to confirm deregistration.
The Deskset screen displays Cordless Headset is currently Not Registered.
The Cordless Headset ON/OFF
light slowly flashes.
4. Press . The User Settings menu appears.
Cordless Headset Registration
Cordless Headset is currently
Registered
Exit
Press DeReg to deregister the Cordless
Headset.
Quick
Dial
DeReg
DeReg
Yes
Cordless Headset Registration
Cordless Headset is currently
Not Registered
Register Exit
Place Cordless Headset in charger.
Press Register to begin process.
Quick
Dial
Exit