Deskset Settings 94
Syn248 SB35031 Deskset User’s Guide Back to Contents
Cordless Accessory Registration and Deregistration Time-Out
For security reasons, the registration process on both the Deskset and the cordless
accessory terminates after two minutes if registration is not successful.
If the registration process terminates, the Deskset returns to the Cordless Headset
Registration menu.
If cordless headset registration fails, the ON/OFF light on the headset flashes twice
every five seconds. To reset the headset, remove the headset from the charger and try
the registration process again, beginning with Step 1, “To register the Cordless Headset:”
on page 92.
If the cordless device is registered to another Deskset or telephone, it must be
deregistered first. See “Deregistering a Cordless Headset” on page 93.
To Next Page
Loading...
