AT&T Syn248 SB35031 - Making a Conference Call

Call Management 37
Syn248 SB35031 Deskset User’s Guide Back to Contents
Making a Conference Call
You can set up a conference call with yourself and two telephone numbers (either
internal, external, or with both).
To make a conference call:
1. Press from an active call screen. The call is put on hold and the conference
setup screen appears.
2. Establish a second call. You can dial the second call normally, or you can select a
held call and take it off hold, or you can start the second call from a list. See
“Accessing Items in Lists” on page 41.
When the second call has been established, the soft key appears.
3. To join the calls, press .
Your extension is now in conference with the other two phone numbers.
Conf
12:30PM Thu Feb 25 2010
Graham Bell 232-555-0176 2:51
Transfer Conf
Quick
Dial
Flash More 1/2
12:30PM Thu Feb 25 2010
232-555-0176 Waiting to Join
Call 2nd number or retrieve held call.
Quick
Dial
ExtList
Active Call Waiting to Join Conference
Press
Conf
Join?
12:30PM Thu Feb 25 2010
232-555-0176 Waiting to Join
Quick
Dial
John Smith 200 0:32
Press Join? to start conference with
this call or press CANCEL.
Join?
Join?
12:30PM Thu Feb 25 2010
232-555-0176 Conference Call
Quick
Dial
200 Conference Call
EndConf Drop Page