9
Getting started
Step 2
Align the cover flat against the battery compartment, then slide it upwards
until it clicks into place.
Battery installation and charging
Step 3
Charge the handset by placing it face forward
in the telephone base or charger. The CHARGE
light under the screen of the handset is on during
charging.
IMPORTANT INFORMATION
Use only the supplied rechargeable battery or replacement battery (model BT183342/
BT283342). To order, visit our website at www.telephones.att.com or call
1 (800) 222-3111. In Canada, dial 1 (866) 288-4268.
If you do not use the handset for a long time, disconnect and remove the battery
to prevent possible leakage.
•
•
CHARGE light
After you install your telephone or power returns following a power outage,
you have to reset the date and time. For instructions, see Set date/time on
pages 15 and 21.
To Next Page
Loading...
Need help?
General
