40
Directory
Create directory entries
Create a new directory entry
Using the handset:
1. Press the MENU soft key when the handset is not in use.
2. Press qCID or pDIR to scroll to DIRECTORY and then
press the SELECT soft key.
3. Press qCID or pDIR to scroll to Add contact, then press
the SELECT soft key. The screen shows ENTER NUMBER.
4. Use the dialing keys (0-9) to enter the number.
Press OFF/CANCEL to backspace and erase a digit.
Press qCID to move the cursor to the left or pDIR to
the right.
Press and hold REDIAL/PAUSE to insert a dialing pause
(a p appears).
5. Press the NEXT soft key to move to the name. The
screen displays Already saved if the number is already in
the directory. You cannot save the same number twice.
6. The screen shows ENTER NAME. See the Character
chart on page 39. Use the dialing keys to enter the
name.
Press OFF/CANCEL to backspace and erase a character.
Press qCID to move the cursor to the left or pDIR to the right.
7. Press the SAVE soft key on the handset to save. There is a confirmation
tone and the screen shows the saved entry.
Using the telephone base:
1. Press the MENU soft key when the telephone base is not in use.
2. Press qCID or pDIR to scroll to Directory and then
press the SELECT soft key.
3. Press qCID or pDIR to scroll to Add contact, then
press the SELECT soft key. The screen shows ENTER
NUMBER.
4. Use the dialing keys (0-9) to enter the number.
Press CANCEL to backspace and erase a digit.
Press qCID to move the cursor to the left or pDIR
to the right.
Press the PAUSE soft key to insert a dialing pause
(a p appears).
•
•
•
•
•
•
•
•
DIRECTORY
Review
Add contact
Speed dial
BACK
SELECT
BACK SELECT
DIRECTORY
BACK
SAVE
ENTER NAME
__
BACK NEXT
ENTER NUMBER
_
ENTER NUMBER
_
PAUSE NEXT
Review
Add contact
Speed dial
SELECT
Answering sys
Directory
Call log
SELECT
To Next Page
Loading...
Need help?
General
