AT&T TL88102BK User Manual

12
Telephone settings
Handset settings
Ringer volume
You can set the ringer volume level to one of six levels or turn the ringer off.
1. Press the MENU soft key when the handset is not in use.
2. Use qCID or pDIR to scroll to RINGERS, then press the
SELECT soft key.
3. Press the SELECT soft key again to select Ringer volume.
4. Press qCID or pDIR to choose Line 1, Line 2 or
Lines 1&2, then press the SELECT soft key.
5. Press qCID or pDIR to adjust the volume. A sample
of each ringer volume plays as you scroll through the
choices. Press the OFF soft key to turn off the ringer
and Ringer muted shows on the screen.
6. Press the SET soft key to save your setting or press
OFF/CANCEL to exit to the previous menu.
NOTES:
The handset ringer volume also determines the ringer volume for intercom calls.
If the ringer volume is set to off, that handset is silenced for all incoming calls.
If you turn off the ringer, a ringer off icon,
1
1,
1
2, or
1
2
1
of the respective phone line(s)
flashes on the screen.
Ringer tone
You can choose one of ten ringer tones.
1. Press the MENU soft key when the handset is not in use.
2. Use qCID or pDIR to scroll to RINGERS, then press the
SELECT soft key.
3. Press qCID or pDIR to scroll to Ringer tone, then press
the SELECT soft key.
4. Press qCID or pDIR to choose Line 1, Line 2 or
Lines 1&2, then press the SELECT soft key.
5. Press qCID or pDIR to sample each ringer tone.
6. Press the SET soft key to save your setting or press the
BACK soft key to exit to the previous menu.
NOTE: If you turn off the ringer volume, you will not hear ringer tone samples.
•
•
•
BACK
SELECT
RINGERS
Ringer volume
Ringer tone
BACK
SELECT
RINGER VOLUME
Line 1
Line 2
Lines 1&2
RINGER VOLUME
OFF
SET
BACK
SELECT
RINGERS
Ringer volume
Ringer tone
BACK
SELECT
RINGER TONE
Line 1
Line 2
Lines 1&2
BACK
RINGER TONE
1
2
3
SET

AT&T TL88102BK Specifications

General

Brand	AT&T
Model	TL88102BK
Category	Cordless Telephone
Language	English