Multiple Handset use
33
Intercom
To silence the ringer of an intercom call:
Press the SILENCE soft key on the destination handset or telephone base.
To end an intercom call:
1. Press the END soft key, CANCEL, /LINE 1 or /LINE 2 on the
telephone base; or press the END soft key, INT or OFF/CANCEL on the
handset, or place the handset back in the telephone base or charger.
2. Both screens show Intercom ended.
NOTES:
You can cancel the intercom call before it is answered by pressing OFF/CANCEL or INT on
your originating handset; or CANCEL on the telephone base.
If the destination handset or telephone base does not answer the intercom call within 100
seconds, or if the handset is in the directory or call log, or out of range, your originating
handset or telephone base shows Unable to call try again and returns to idle mode.
You can use a maximum of four handsets, or three handsets and the telephone base, at a
time. When two handsets are used on an intercom call, use two other system handsets for an
outside call.
Answer an incoming call during an intercom call
If you receive an incoming call during an intercom call, there will be an
alert tone.
Using the handset:
To answer the call, press
LINE 1/FLASH for line 1 or LINE 2/FLASH for line 2.
The intercom call ends automatically.
-OR-
Press the BACK soft key to continue with the intercom call without answering
the incoming call. Instead, the answering system answers the call.
Using the telephone base:
To answer the call, press /LINE 1 or /LINE 2. The intercom call ends
automatically.
-OR-
Press the BACK soft key to continue with the intercom call without answering
the incoming call. Instead, the answering system answers the call.
•
•
•
•
To Next Page
Loading...
Need help?
General
